SES or E14 18 LED Tower Halogen replacement LED bulbs are suitable for both 12v and 24v DC systems whilst maintaining consistent brightness during charging and load fluctuations.
The SES or E14 bulbs are very common as low voltage table lamps and wall lights in Boats, Trains and other battery supplied systems, originating from early passenger transportion they are often referred to as ‘Bus Bulbs’.
Specifications for SES-18LT
- SES or E14 Small Edison Screw Tower style LED bulb
- SES or E14 18 LED Tower bulb
- 18 x SMD2835 (new type) LEDs
- Single contact pin (14mm Small Edison Screw but Low Voltage!)
- Lumens: 274L (Warm White) or 320L (Cool White)
- Colour Temperature: 2700K WW or 6390K CW
- Wattage: 2.4W
- Voltage: 10v – 30v DC
- Current draw (at 12.7v): 181ma (0.181A)
- Approximate Equivalent to 21W Tungsten bulb
- 360 degree wide angle beam
- Dimensions: Bulb head diameter is 18mm, length 52mm (inc base)
- EMI free (No electrical interference)
- Features: Internally PROTECTED against Voltage Spikes and FUSED for extra safety
We hold a wide range of Tower SES/E27 Small Edison Screw bulbs
Our LED bulbs are available in Warm White which is intended to mimic the warm slightly yellow colour of a filament bulb and Cool White which is that colder white light you see from LED torches, cool white is always brighter than warm white.
Unless otherwise stated, all of our LED bulbs are wide angle which will give about 120 degrees illumination from any single LED. or 360 degree from Tower style bulbs.
If you need any advice or just want to ensure that you are selecting the correct bulb for your application – simply email or call us for a personal chat with our experienced team.
John W (verified owner) –
Brilliant light when used as a replacement in my boats 12v fridge.
Robert Brice (verified owner) –
Brilliant bit of kit . worth investing in for my camper van gives out nice light.
RIchard Chandler (verified owner) –
Replaced a incandescent bulb, in a classic angle poise from wartime bomber, required 12v bulb and was having issues with heat from incandescent bulb
Keith Williams. –
Brilliant. Works in our household tiffany lamp which is now on our canalboat.
Talitha Wachtelborn (verified owner) –
Used to convert a mains AC light to 12v. It IS possible to have nice lights on boats!
Guy Cathcart (verified owner) –
Got this bulb to go in a Tiffany light, finally tried it last night and it’s fantastic.
Julia Arman (verified owner) –
Second one if these that we have ordered from Bedazzled – great product and first still going strong 4 years later. Fast and good value delivery. Very happy
mr d newsome (verified owner) –
brilliant just the job for using on flashing lights I fit on electric gates
Paul Collett (verified owner) –
Works well in my 12v fridge. Thanks
Gerald Wiggins (verified owner) –
Good product great service