The G4 Wired 21 LED (G4W-21LP) bulbs are general purpose bulbs ideal for conversion of many awkward fittings such as 2D Fluoresent ceiling lights. See the handy tips and examples in our ‘How to’ section .
- General purpose wired replacement LED bulb
- G4 Wired 21 LED
- 21 x SMD2835 (new type) LEDs
- Lumens: 351L (Warm White) or 378L (Cool White)
- Colour Temperature: 2705K WW or 6670K CW
- Wattage: 2.8W
- Voltage: 10v – 30v DC
- Current draw (at 12.7v): 240ma (0.24A)
- Approximate Equivalent to 35W Tungsten bulb
- 120 degree wide angle beam
- Dimensions: 50mm diameter by 8mm deep
- EMI free (No electrical interference)
- Features: Internally PROTECTED against Voltage Spikes and FUSED for extra safety
Our LED bulbs are available in Warm White which is intended to mimic the warm slightly yellow colour of a filament bulb and Cool White which is that colder white light you see from LED torches, cool white is always brighter than warm white.
Bedazzled LED Lighting has been designed with the harshest electrical environment in mind and strong attention to safety & reliability. ALL of our LED bulbs are suitable for both 12v and 24v DC systems whilst maintaining consistant brightness during charging and load fluctuations.
If you need any advice or just want to ensure that you are selecting the correct bulb for your application – simply email or call us for a personal chat with our experienced team.
Robin Cook –
I replaced all my D type fluorescent fittings on my boat with these, brilliant and so much less power draw. I think you will need a glue gun to adhere them. Recommended
George Gaudin (verified owner) –
I got my order wrong and was contacted by the company to check my order, most helpful. I changed all my flourscents on my boat after on of the inverters caught fire. Great company great product. With the cabled leds I used sticky pads for the conversion.
Keith Ellison (verified owner) –
Used these to replace the double D fluorescents on my boat. No failures yet after a few years and the light is as good. I build up sticky pads to mount them.
Steve –
Cheap reliable leds that means you can keep your original light fittings, service is great , would recommend bedazzled to anyone, keep up the good work
Stephen O’Connor (verified owner) –
I already had leds but the light was poor. Fitted the bedazzled leds 3 times as bright and easy to fit using double sided tape build up in layers. Great service thanks.
Ian Mallabar –
Great product at the right price and prompt delivery.
Alan Armsby (verified owner) –
Perfect replacement for the fluorescent bulb in my motorhome,easy fit.
Cherie (verified owner) –
Good product
Richard Hills (verified owner) –
Excellent replacement for my old fluorescent lights. It will take a while to replace them all but well worth the effort and will draw a whole lot less power. Company service was excellent.
Murray Winters (verified owner) –
Excellent. Fitting into old 2d flourescent unit took a little bit of practical ability but very well worth it. Light is clean and bright.
Mike of exelbee (verified owner) –
Bought 4 to replace the existing 12v tube ceiling dome lights in our narrowboat. Old one draws 2.5amps each now all four draw 1amp. So easy to fit just use common sense. This was a no brainer. Brill service would have liked them cheaper of course but hay…. Thanks.
Graham –
Just perfect for bringing a disused Anglepoise lamp back to life. Very easy to install and very helpful company to deal with.
Leonard –
Converted a twin tube bulkhead to LED – check diameter of sealant cartridges – same as LED plate so cut off a suitable length to use as a mounting.
Leonard –
Repeat order so need I say more.
Alan Dorman (verified owner) –
I used these to replace the halogen bulbs in the dome lights in my boat. The pin orientation was wrong for a simple plug-in swap. I followed the hint to build pillars with sticky pads and it all worked great.
pc (verified owner) –
I can’t comment yet of the quality of the fitting yet as I haven’t fitted it but the service I got from Bedazzled was excellent. I called to find out if they could do the fittings I wanted in a certain size and although they it needed a certain amount of preparation I received the fittings in the post the following day.
Richard Milwlard (verified owner) –
Bought one of theses bulbs some time ago, it is still going so thought best I do the others as well, decent light outout, much better than the ebay cheapies.
Mike Relf (verified owner) –
Excellent light at a fraction of the power that the old florescent tubes used. I used a 40mm plastic waste pipe coupler cut down to make a mounting sleeve and glued this in the old light fittings. A perfect fit and looks as if was originally made that way!