12v/24v CAB9XR downlight Satin Chrome finish with RED/WHITE ‘Night Vision’ 9 LED replaceable bulb, low profile downlight
Our Cabinet lights are industry standard metal fittings with a choice of Brass, Chrome, Satin Chrome or White finish. The all metal construction helps extend the life of the replaceable LED bulb by conducting away much of the (small amount) of heat generated by LEDs. There are no polarity considerations to worry about when connecting!
- NEW ‘Night Vision‘ Red/White version
- 12v/24v CAB9XR downlight Satin Chrome with RED/WHITE ‘Night Vision’ 9 LED replaceable bulb
- Can be recessed or surface mounted
- Starts as 3 Red LEDs then switches to 6 White LEDs using your ON/OFF switch
- 9 x SMD2835 (new type) LEDs
- Lumens: 163Lm (Warm White) 170Lm (Cool White), 27Lm (Red)
- Colour Temperature: 2900K WW or 6000K CW
- Wattage: 1.85W
- Voltage: 10v – 30v DC
- Current draw (at 12v): 108ma/46ma
- Approximate Equivalent to 15W (white) or 5W (red) Halogen bulb
- 120 degree wide angle beam
- Dimensions: 70mm diameter by 19mm deep (27mm surface mounted)
- Hole size for recessed: 55mm to 60mm diameter
- No polarity considerations
- EMI free (No electrical interference)
- Features: Internally PROTECTED against Voltage Spikes and FUSED for extra safety
Available in Brass, Chrome, Satin Chrome and White finish <Click here> to view full range.
Available in a range of brightness’s as 3, 6, 8, 10 or 12 LED equivalent to 5w, 10w, 15w, 20w, or 25w Halogen bulb respectively. <Click here>
Choice of Warm White bulb which is intended to mimic the warm slightly yellow colour of a filament bulb and Cool White bulb which is that colder white light you see from LED torches, cool white is always a little brighter than warm white.
ALL of our LED bulbs are suitable for both 12v and 24v DC systems whilst maintaining consistent brightness during charging and load fluctuations.